Inner Rear View Mirror
REMOVALHINT:
- The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included.
- EC mirror stands for electrochromic mirror.
1. REMOVE INNER REAR VIEW MIRROR ASSEMBLY
a. Using a torx socket wrench (T20), remove the screw.
b. Slide the mirror in the direction indicated by the arrow in the illustration, and remove the mirror.
2. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)
a. Remove the mirror cover
b. Disconnect the connector.
c. Using a torx socket wrench (T20), remove the screw.
d. Slide the mirror in the direction indicated by the arrow in the illustration, and remove the mirror.
INSTALLATION
1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)
Torque: 1.2 N.m (12.2 kgf.cm, 11 in.lbf)
2. INSTALL INNER REAR VIEW MIRROR ASSEMBLY
Torque: 1.2 N.m (12.2 kgf.cm, 11 in.lbf)
3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ EC Mirror)
a. Disconnect the mirror connector.
b. Apply battery voltage and check operation of the mirror face.
If the result is not as specified, replace the mirror assembly.
4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ EC Mirror)
a. Disconnect the mirror connector.
b. Apply battery voltage and check operation of the mirror face.
If the result is not as specified, replace the mirror assembly.