Component Inspection

INSPECT BRAKE WARNING LIGHT

a. Inspect the parking brake warning light.
1. Disconnect the connector from the parking brake switch.
2. Turn the ignition switch ON.
3. Ground the terminal of the wire harness side connector, then check the parking brake warning light.

OK:
Brake warning light comes on.

b. Inspect the brake fluid level warning light.
1. Disconnect the connector from the brake fluid level warning switch.
2. Turn the ignition switch ON.
3. Connect a terminal to the other terminal of the wire harness side connector, then check the brake fluid level warning switch.

OK:
Brake warning light comes on.