Water Pump: Service and Repair

REPLACEMENT
1. REMOVE ENGINE UNDER COVER RH
2. DRAIN ENGINE COOLANT
3. REMOVE FAN AND GENERATOR V BELT
4. REMOVE GENERATOR ASSEMBLY
5. REMOVE WATER PUMP ASSEMBLY





a) Remove the 6 bolts, then remove the water pump.





b) Remove the O-ring from the timing chain cover.
6. INSTALL WATER PUMP ASSEMBLY
a) Install a new O-ring into the timing chain cover.





b) Install the water pump with the 6 bolts.
Torque:
9.0 Nm (92 kgf-cm, 80 inch lbs.) for bolt A
11 Nm (112 kgf-cm, 8 ft. lbs.) for bolt B
7. INSTALL GENERATOR ASSEMBLY
8. ADD ENGINE COOLANT
9. CHECK FOR ENGINE COOLANT LEAKAGE