Voltage Inverter Assy

VOLTAGE INVERTER ASSEMBLY

REPLACEMENT

HINT: Installation is in the reverse order of removal.

1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE FRONT SEAT (DRIVER SEAT POSITION)




3. REMOVE VOLTAGE INVERTER ASSEMBLY
a. Remove the 2 bolts.
b. Fold the floor carpet to the inside.
c. Disconnect the connector.
d. Remove the voltage inverter assembly.




4. INSTALL VOLTAGE INVERTER ASSEMBLY
a. Install the voltage inverter assembly.
b. Connect the connector.
c. Fold the floor carpet to the inside.
d. Tighten the 2 bolts.

Torque: 7.0 N.m (71 kgf.cm, 62 in.lbf)

NOTE: Tighten the bolts in the order shown in the illustration to install the voltage inverter assembly.

5. INSTALL FRONT SEAT (DRIVER SEAT POSITION)