ABS W/EBD & BA & TRAC & VSC System

DTC C1251/51 PUMP MOTOR IS LOCKED/OPEN CIRCUIT IN PUMP MOTOR GROUND

CIRCUIT DESCRIPTION

DTC Detecting Condition:

The ABS pump motor is located inside the brake actuator. The motor is used for BA, TRAC and VSC operation.

Wiring Diagram:

Step 1-2:

Step 3:

INSPECTION PROCEDURE

NOTE: When replacing the ABS & TRACTION actuator assembly, perform zero point calibration. Calibration

HINT: Start the inspection from step 1 when using the hand-held tester and start from step 2 when not using the hand-held tester.