Shifter M/T: Service and Repair

FLOOR SHIFT SHIFT LEVER ASSEMBLY





COMPONENTS

REPLACEMENT
1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
2. REMOVE CONSOLE PANEL UPPER
3. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY
4. REMOVE CONSOLE BOX SUB-ASSEMBLY REAR





5. SEPARATE FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT
a. Remove the clip and separate the end of the shift cable from the shift lever assembly.





b. Using a screwdriver, release the cable outer spring.
c. Turn the lock, separate the shift cable from the shift lever retainer.





6. SEPARATE FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT
a. Remove the clip and separate the end of the select cable from the shift lever assembly.





b. Using a screwdriver, release the cable outer spring.
c. Turn the lock, separate the select cable from the shift lever retainer.





7. REMOVE FLOOR SHIFT SHIFT LEVER ASSEMBLY
a. Remove the 4 bolts and shift lever assembly.





8. INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY
a. Install the shift lever assembly with the 4 bolts.
Torque: 12 Nm (122 kgf-cm, 9 ft. lbs.)





9. CONNECT FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT
a. Connect the select cable to the retainer of shift lever assembly, turn the lock.

NOTICE: The projecting part of the lock should face upward when the select cable is installed.

b. Install the cable outer spring to the lock.

NOTICE: Make sure that after installation the cable outer spring is moved to the place shown in the illustration.





c. Connect the end of the select cable and install the clip to the shift lever assembly.





10. CONNECT FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT
a. Connect the shift cable to the retainer of shift lever assembly, turn the lock.

NOTICE: The projecting part of the lock should face upward when the shift cable is installed.

b. Install the cable outer spring to the lock.

NOTICE: Make sure that after installation the cable outer spring is moved to the place shown in the illustration.





c. Connect the end of the shift cable and install the clip to the shift lever assembly.
11. INSTALL CONSOLE BOX SUB-ASSEMBLY REAR
12. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY
13. INSTALL CONSOLE PANEL UPPER
14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY