Accelerator Pedal: Service and Repair

ACCELERATOR PEDAL ASSEMBLY (1ZZ- FE)

REPLACEMENT

1. DISCONNECT BATTERY NEGATIVE TERMINAL

2. REMOVE ACCELERATOR PEDAL ASSEMBLY




a. Disconnect the accelerator position sensor connector.
b. Remove the 2 bolts, then remove the accelerator pedal.

3. INSTALL ACCELERATOR PEDAL ASSEMBLY




a. Install the accelerator pedal with the 2 bolts.

Torque: 5.4 Nm (55 kgf.cm, 48 in.lbf)

b. Connect the accelerator position sensor connector.

4. CONNECT BATTERY NEGATIVE TERMINAL

Torque: 5.4 Nm (55 kgf.cm, 48 in.lbf)