On-Vehicle Inspection

POWER DOOR LOCK CONTROL SYSTEM

ON-VEHICLE INSPECTION

1. CHECK POWER DOOR LOCK CONTROL OPERATION

HINT:
- w/ Power window:
The door control switch is built in the master switch on the driver's door and also on the passenger's door.
- w/o Power window:
The door control switch is on the driver's door and also on the passenger's door.

a. Check the basic function.
1. Check that all the doors lock when the door control switch (for manual operation) is turned to the lock side, and all the doors unlock when turned to the unlock side.
2. Check that all the doors lock when the driver's door lock key cylinder is turned to the lock side with the key.
3. Check that all the doors lock when the passenger's door lock key cylinder is turned to the lock side with the key.
4. Check that only the driver's door unlocks when the driver's door lock key cylinder is turned to the unlock side with the key. Check that the remaining doors unlock when the driver's door lock key cylinder is turned to the unlock side with the key once again within 3 seconds from the first unlocking operation (2-step unlocking function).

HINT: The 2-step unlocking function applies to the driver's door lock key cylinder only.

5. Check that all the doors unlock when the passenger's door lock key cylinder is turned to the unlock side once with the key.

b. Check the key confinement prevention function.

NOTE: In order to prevent the key from being locked in the vehicle, the inspection should be performed with the driver's door window open.

1. Insert the key into the ignition key cylinder.
2. With the driver's door open, check that all the doors will immediately unlock when the door lock knob for the driver's door is turned to the lock side.
3. With the driver's door open, check that all the doors will immediately unlock when the door control switch (for manual operation) is turned to the lock side.
4. With the driver's door open, lock the driver's door by holding the driver's door lock knob in the lock side for 2 seconds or more, and then close the driver's door. At this time, check that all the doors will unlock.

c. Check the security function.
1. Close all the doors with the driver's door window open so that the door control switch (for manual operation) can be operated from the outside of the vehicle.
2. Pull out the key, open the driver's door, and close and lock the door with the door control switch (for manual operation). Under this condition, check that all the doors will not unlock when the door control switch (for manual operation) is turned to the unlock side from the outside of the vehicle.
3. Pull out the key, and close and lock the driver's door by the key operation. Under this condition, check that all the doors will not unlock when the door control switch (for manual operation) is turned to the unlock side from the outside of the vehicle.
4. W/ wireless door lock control system:
Pull out the key, close the driver's door and lock the door by the wireless door lock operation. Under this condition, check that all the doors will not unlock when the door control switch (for manual operation) is turned to the unlock side from the outside of the vehicle.
5. Check that the security function will cancel when any of the following conditions is satisfied.
- The ignition switch is turned ON.
- The driver's door is unlocked by the key operation.
- The door control switch is (for manual operation) turned to the unlock side after unlocking the door control knob manually.
- The doors are unlocked by the wireless operation (for wireless door lock models).

d. Check the illuminated entry function.
1. Check that the room lamp, ignition switch lamp and rear room lamp will light up when opening any of the doors and fade out in 15 seconds after closing the door.
2. Check that the room lamp, ignition switch lamp and rear room lamp will fade out immediately when either of the following conditions is satisfied.
- All the doors are closed and locked.
- All the doors are closed and the ignition switch is turned to ON or ACC.