Symptom Diagnostic Procedures

ONLY WIRELESS CONTROL FUNCTION DOES NOT OPERATE (PREPARE NEW OR NORMAL TRANSMITTER OF THE SAME TYPE VEHICLE)

CIRCUIT DESCRIPTION

The door control receiver receives a signal from the transmitter and sends this signal to the integration relay. Then, the integration relay controls door operation by sending a door LOCK/UNLOCK signal to each door lock motor.

Wiring Diagram:

Step 1-4:

Step 5:

Step 6-7:

Step 8-10:

Step 11-12:

Step 13-14:

Step 15-16:

INSPECTION PROCEDURE

HINT: The switch described in this text is a switch for transmitting signals which is built in the door control transmitter.