Power Point Socket Assy

Audio & Visual System Location:

REPLACEMENT

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (M/T TRANSAXLE)
2. REMOVE CONSOLE PANEL UPPER REAR
3. REMOVE INSTRUMENT PANEL CUP HOLDER (W/O ASHTRAY)
4. REMOVE FRONT ASH RECEPTACLE ASSEMBLY (W/ ASHTRAY)
5. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER
6. REMOVE POWER POINT SOCKET ASSEMBLY

a. Turn the socket in the circumference direction as shown in the illustration, disengage the claw between the socket and the power pint socket cover, and push out the socket to the room side.

b. Align the socket with the notch on the power point socket cover, remove the power point socket assembly to the room side.

7. INSTALL POWER POINT SOCKET ASSEMBLY
a. Align the socket with the notch on the power point socket cover, push the power point socket assembly into as hard as possible and install it.