Foot Light Circuit

FOOT LIGHT CIRCUIT

CIRCUIT DESCRIPTION
When the memory mirror ECU receives the signal(s) from the certification ECU through BEAN communication, it illuminates the foot light. The foot light is installed on the bottom of the outer rear view mirror and comes on or does off according to the following conditions.

The light comes on when:
- Doors are unlocked by wireless operation.
- The key code ID (key code recognition signal) for smart key system matches.
- The driver's door is manually unlocked with the shift lever is in the P position or the ignition off. (Both driver's and passenger's side come on.)

The light goes off when:
- Doors are locked by wireless operation.
- Doors are locked by the smart key system.
- The setting time has elapsed after the light come on.
- The setting time has elapsed after the driver's or passenger's door is closed while the light is on.
- The ignition is off and the shift lever is in any position other than P.
- Doors are locked or unlocked by interlock operation or manual switch.

Wiring Diagram:

Step 1-2:

Step 2 (Continued):

INSPECTION PROCEDURE