Diagnostic Start Up/Finish

DIAGNOSTIC START-UP/FINISH

HINT:
- Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle.
- After the ignition switch is turned on (IG), check that the map is displayed before starting the diagnostic mode. Otherwise, some items cannot be checked.




1. Starting diagnostic mode
a. Start the engine.
b. While pressing and holding the "INFO" switch, operate the light control switch: OFF -> ON -> OFF -> ON -> OFF -> ON -> OFF.
c. The diagnostic mode starts and the "Service Check Mode" screen will be displayed. Service inspection starts automatically and the result will be displayed.




2. Diagnosis system mode

3. Finish diagnostic mode.
a. Turn the ignition switch off.