Power Point Socket Assembly RR

Audio & Visual System - Part 2:

POWER POINT SOCKET ASSEMBLY RR

REPLACEMENT

HINT:
- Installation is in the reverse order of removal.

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
2. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
3. REMOVE CONSOLE BOX SUB-ASSEMBLY REAR W/CONSOLE DOOR




4. REMOVE POWER POINT SOCKET ASSEMBLY RR
a. Turn the socket in the circumference direction as shown in the illustration, disengage the claw between the socket and the power point socket cover, and push out the socket to the room side.

5. INSTALL POWER POINT SOCKET ASSEMBLY RR
a. Align the socket with the notch on the power point socket cover RR and install the power socket assembly RR by pushing it in as hard as possible.