Outer Rear View Mirror

OUTER REAR VIEW MIRROR ASSEMBLY

REPLACEMENT

HINT:
- The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included.
- Use the same procedures for the RH side and LH side.

1. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
a. Remove the front door lower frame bracket garnish.
b. Remove the front door inside handle bezel plug.
c. Remove the front door trim board.




2. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH
a. Disconnect the connector.
b. Remove the 3 nuts and mirror.




3. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH
a. Install the mirror with the 3 nuts.

Torque: 4.5 Nm (46 kgf.cm, 40 in.lbf)