Engine Immobilizer System

TERMINALS OF ECU

1. CHECK TRANSPONDER KEY AMPLIFIER

a. Disconnect the I14 amplifier connector.

b. Measure the resistance of the wire harness side connector.

c. Reconnect the I14 amplifier connector.

d. Measure the resistance and voltage of the connector.

e. Inspect using an oscilloscope.

2. CHECK TRANSPONDER KEY ECU ASSY

a. Disconnect the T5 ECU connector.

b. Measure the voltage and resistance of the wire harness side connector.
c. Reconnect the T5 ECU connector.

d. Measure the voltage of the connector.

e. Inspect using an oscilloscope.

3. CHECK ECM

a. Disconnect the E5 and E6 ECM connectors.

b. Measure the voltage and resistance of the wire harness side connectors.

c. Inspect using an oscilloscope.