With Manufacturer's Scan Tool

DTC CHECK (USING HAND-HELD TESTER)




a. Check DTCs.
1. Connect the hand-held tester to the DLC3.
2. Turn the ignition switch to the ON position.
3. Read the DTCs by following the prompts on the tester screen.

HINT: Refer to the hand-held tester operator's manual for further details.




b. Clear the DTCs.
1. Connect the hand-held tester to the DLC3.
2. Turn the ignition switch to the ON position.
3. Operate the hand-held tester to erase the codes.