Accelerator Pedal: Service and Repair

REPLACEMENT

1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE ACCELERATOR PEDAL ASSY




a. Disconnect the accelerator position sensor connector.
b. Remove the 2 bolts, then remove the accelerator pedal.

3. INSTALL ACCELERATOR PEDAL ASSY




a. Install the accelerator pedal with the 2 bolts.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

b. Connect the accelerator position sensor connector.

4. CONNECT BATTERY NEGATIVE TERMINAL
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)