Pinout Values and Diagnostic Parameters

TERMINALS OF ECU




SKID CONTROL ECU (w/ VSC):




1. TERMINAL DESCRIPTION

2. TERMINAL INSPECTION




a. Disconnect the connector and measure the voltage on the wire harness side.

HINT: Voltage can not be measured with the connector connected to the skid control ECU as the connector is water resistance.




SKID CONTROL ECU (w/o VSC):




3. TERMINAL DESCRIPTION

4. TERMINAL INSPECTION




a. Disconnect the connector and measure the voltage on the wire harness side.

HINT: Voltage can not be measured with the connector connected to the skid control ECU as the connector is water resistance.