With Manufacturer's Scan Tool

DTC CHECK (USING HAND-HELD TESTER)

Check DTCs.




1. Connect the hand-held tester to the DLC3.
2. Turn the ignition switch to the ON position.
3. Read the DTCs following the prompts on the tester screen.

HINT: Refer to the hand-held tester operator's manual for further details.

Clear the DTCs using the hand-held tester.




1. Connect the hand-held tester to the DLC3.
2. Turn the ignition switch to the ON position.
3. Operate the hand-held tester to clear the codes.

HINT: Refer to the hand-held tester operator's manual for further details.