Crankshaft: Specifications

Crankshaft





CRANKSHAFT THRUST CLEARANCE
Using a dial indicator, measure the thrust clearance while moving the crankshaft back and forth.
Standard thrust clearance 0.09 - 0.19 mm (0.0035 - 0.0075 inch)
Maximum thrust clearance 0.3 mm (0.012 inch)
Thrust washer thickness 2.430 - 2.480 mm (0.09567 - 0.09764 inch)

Crankshaft For Circle Runout
Using a dial indicator, measure the circle runout, as shown in the illustration.
Maximum circle runout 0.03 mm (0.0012 inch)

Main Journals And Crank Pins
Using a micrometer, measure the diameter of each main journal and crank pin.
Main journal diameter 45.988 - 46.000 mm (1.8106 - 1.8110 inch)
Crank pin diameter 39.992 - 40.000 mm (1.5745 - 1.5748 inch)
Check each main journal and crank pin for taper and out of-round.
Maximum taper and out-of-round 0.02 mm (0.0008 inch)