Pinout Values and Diagnostic Parameters
TERMINALS OF ECUTerminals Of Control Module - Integration Relay:
1. INSPECT INTEGRATION RELAY
a. Disconnect the connector and check the resistance of each terminal of the connector.
If the result is not as specified, the vehicle side may have a malfunction.
b. Reconnect the connector and check each terminal.
If the result is not as specified, the integration relay may have a malfunction.
Terminals Of Control Module - Instrument Panel J/B (Integration Relay):
2. INSPECT INSTRUMENT PANEL J/B (INTEGRATION RELAY)
a. Disconnect connectors ID, IF, IH and IJ of the instrument panel J/B.
b. Check each terminal of the connectors.
If the result is not as specified, the vehicle side may have a malfunction.
c. Reconnect the connectors and check each terminal.
If the result is not as specified, the instrument panel J/B (integration relay) assembly may malfunction.