Without Scan Tool

CHECK DTC (NOT USING HAND-HELD TESTER)




a. Using SST, connect terminals Tc and CG of the DLC3.

SST 09843-18040

b. Turn the ignition switch to the ON position.




c. Read the DTC from the ABS warning light on the combination meter.

HINT:
- If a code does not appear, inspect the diagnostic circuit or ABS warning light circuit.
- As examples, the blinking patterns for normal code and codes 11 and 21 are shown.

d. Codes are explained in the code table.
If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC will be displayed first.

e. After completing the check, remove the SST from the DLC3.

SST 09843-18040