Without Scan Tool

DTC CHECK (USING SST CHECK WIRE)




1. Using SST, connect terminals Tc and CG of the DLC3.

SST 09843-18040

2. Turn the ignition switch to the ON position.




3. Read the DTCs from the ABS warning light or VSC warning light on the combination meter.

HINT:
- If 2 or more malfunctions are detected at the same time, the lowest numbered code will be displayed first.
- If no code appears, inspect the diagnostic circuit, ABS warning light circuit or VSC warning light circuit.

Trouble Area
Tc and CG terminal circuit
ABS warning light circuit
VSC warning light circuit

- As examples, the blinking patterns for a normal system code and codes 11 and 21 are shown.

4. Codes are explained in the code table.
5 . After completing the check, disconnect the SST from terminals Tc and CG of the DLC3.