Programming and Relearning

PRECAUTION

NOTE: When the negative (-) battery cable is disconnected, initialize the following systems after the cable is reconnected.
- Power Window Control System
- Sliding Roof System

1. RESET MEMORY (AT initialization)

NOTE:
- Perform the RESET MEMORY (AT initialization) when replacing the automatic transaxle assembly, engine assembly or ECM.
- Perform the REGISTRATION (VIN registration) when replacing the ECM.

HINT: RESET MEMORY can not be completed by only disconnecting the battery cable.

2. EXPRESSIONS OF IGNITION SWITCH




The type of ignition switch used on this model differs according to the specifications of the vehicle.

The expressions listed in the table are used in this section.