Without Scan Tool

Clear the DTCs




1. Using SST, connect terminals TC and CG of the DLC3.
SST 09843-18040

2. Turn the ignition switch on (IG).




3. Clear the DTCs stored in the ECU by depressing the brake pedal 8 times or more within 5 seconds.
4. Check that the ABS warning light indicates a normal system code.
5. Remove the SST.

HINT: DTCs cannot be cleared by removing the battery cable or the ECU-IG fuse.

END OF CHECK/CLEAR
a. Turn the ignition switch on (IG).
b. Check that the ABS and VSC warning lights go off within approximately 3 seconds.