Warning Light And Indicator Light Check

WARNING LIGHT AND INDICATOR LIGHT CHECK




a. Release the parking brake.

NOTE: When releasing the parking brake, set chocks to hold the vehicle for safety.

HINT: When the parking brake is applied or the level of the brake fluid is low, the brake warning light comes on.

b. When the ignition switch is turned on (IG), check that the ABS, BRAKE, VSC warning lights and the SLIP indicator light come on for approximately 3 seconds.

HINT: If the warning light and indicator light check result is not normal, proceed to troubleshooting for the ABS, BRAKE, VSC warning light circuits, and SLIP indicator light circuit.

If the indicator remains on, proceed to troubleshooting for the light circuit.