Registration
REGISTRATION1. DESCRIPTION OF REGISTRATION
HINT:
- ID code is the same as recognition codes for the wireless transmitter and the engine immobilizer function. Registering an ID code enables the smart key system, the wireless door lock control function and the engine immobilizer function to be operated.
- Code registration is needed when the certification ECU, ID code box, steering lock ECU or key is replaced with a new one.
Vehicles with the smart key system do not have a key slot. Therefore, hold the key close to the engine switch to register the key as shown in the illustration.
2. Part replacement and key registration procedures
Part 1:
Part 2:
The table shows ECU replacement and key registration procedures in case the malfunctioning ECU has been specified after troubleshooting the smart key system.
HINT:
- The following procedures indicated in the table require the use of the hand-held tester:
New key ID registration
Additional key ID registration
Key ID erasure
ECU code registration
- If the customer has not brought all the registered keys, replacement of the ID code box is also required.
- A maximum of 7 keys can be registered.
3. Key registration procedures
a. New key ID registration
(If replacing the certification ECU and ID code box or if replacing the certification ECU, ID code box, and steering lock ECU, perform the shown.)
b. New key ID registration (If replacing the certification ECU, perform the shown.)
c. Additional key ID registration
d. Key ID erasure
HINT: Erase all the registered key codes except one.
e. ECU code registration