Symptom Diagnostic Procedures

ONLY WIRELESS CONTROL FUNCTION DOES NOT OPERATE (PREPARE NEW OR NORMAL TRANSMITTER OF THE SAME TYPE VEHICLE)

CIRCUIT DESCRIPTION

The door control receiver receives a signal from the transmitter and sends this signal to the integration relay.

Then, the integration relay controls door operation by sending a door LOCK/UNLOCK signal to each door lock motor.

Wiring Diagram:

Step 1 - 4:

Step 5:

Step 6:

Step 7 - 10:

Step 11 - 12:

Step 13 - 14:

Step 15 - 16:

INSPECTION PROCEDURE

HINT: The switch described in this text is a switch for transmitting signals which is built in the door control transmitter.