System Specifications

Cylinder block
Cylinder head surface warpage Maximum 0.05 mm (0.0020 inch)
Cylinder bore diameter STD 75.000 - 75.013 mm (2.95275 - 2.95326 inch)
Difference limit 0. 10 mm (0.0039 inch)
Main journal bore diameter
Mark 0 50.000 - 50.003 mm (1.96850 - 1.96862 inch)
Mark 1 50.003 - 50.005 mm (1.96862 - 1.96870 inch)
Mark 2 50.005 - 50.007 mm (1.96870 - 1.96878 inch)
Mark 3 50.007 - 50.010 mm (1.96878 - 1.96889 inch)
Mark 4 50.010 - 50.012 mm (1.96889 - 1.96897 inch)
Mark 5 50.012 - 50.014 mm (1.96897 - 1.96905 inch)
Mark 6 50.014 - 50.016 mm (1.96905 - 1.96913 inch)
12 pointed head bearing cap sub-assembly bolt diameter
at tension portion STD 7.3 - 7.5 mm (0.287 - 0.295 inch)
Minimum 7.3 mm (0.287 inch)
Main Bearing Cap
Torque:
1ST 22 Nm (220 kgf-cm, 16 ft. lbs.)
2ND Turn 90°
Crankshaft pulley
Torque 128 Nm (1,300 kgf-cm, 94 ft. lbs.)