ABS w/ EBD System

DIAGNOSTIC TROUBLE CODE CHART

C0200 - C1249:

C1251 - Always ON:

NOTE: When removing the part, turn the Ignition switch to OFF.

HINT:
- Using SST 09843-18040, it connect the terminal Tc and CG of DLC3.
- If any abnormality is not found when inspecting parts, inspect the ECU and ground points for poor contact.
- If a malfunction code is displayed during the DTC check, check the circuit listed that code. For details of each code, turn to the page referred to under the respective "DTC No." in the DTC chart.
- When 2 or more DTC's are recorded, and the problem is not identified, perform circuit inspection of the other DTC's.

C1271 - C1278:

DTC of speed sensor check function: