Convertible
REMOVAL1. REMOVE TARPAULIN STORAGE COVER
2. REMOVE REAR SEAT CUSHION AND SEATBACK ASSEMBLY
3. REMOVE FRONT DOOR SCUFF PLATE
Using a screwdriver, remove the front door scuff plate.
HINT: Tape the screwdriver tip before use.
4. REMOVE QUARTER TRIM PANEL
a. Remove the bolt and front seat outer belt floor anchor.
b. Remove the 4 screws.
c. RH only:
Disconnect the courtesy light connector.
d. Remove the quarter trim panel.
e. RH only:
Remove the courtesy light from the quarter trim upper panel.
f. Remove the quarter window weatherstrip.
5. REMOVE SPEAKER WITH SPEAKER SETTING BRACKET
a. Disconnect the connector.
b. Remove the 4 bolts and speaker with speaker setting bracket.
6. REMOVE NO.1 QUARTER TRIM PANEL BRACKET
Remove the 2 bolts and bracket.
7. REMOVE CENTER PILLAR DUST PROOF
Using a clip remover, remove the 3 clips and center pillar dust proof.
HINT: At the time of installation, please refer to the following item.
- When reusing the dust proof, wipe the dust proof surface with alcohol rub.
- When installing a new dust proof, remove the tape from it.
8. REMOVE QUARTER TRIM BASE
Remove the 2 nuts and quarter trim base.
9. REMOVE QUARTER WINDOW ASSEMBLY
a. Fully close the quarter window.
b. Disconnect the motor wire harness.
c. Remove the 3 nuts.
d. Remove the quarter window assembly from the vehicle.
10. REMOVE QUARTER WINDOW FROM QUARTER WINDOW GUIDE
a. Remove the bolt and front quarter window glass stopper.
b. Remove the bolt and rear quarter window glass stopper.
c. Remove the 3 bolts and quarter window.
INSTALLATION
Installation is in the reverse order of removal