Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Speed Sensor, Rear






REMOVAL





1. DISCONNECT SPEED SENSOR CONNECTOR
a. Remove the seat cushion, seatback and quarter trim.
b. Disconnect the speed sensor connector, and pull out the sensor wire harness with the grommet.





2. REMOVE SPEED SENSOR
a. Remove the 2 sensor wire harness clamp bolts from the body and shock absorber.
b. Remove the speed sensor from the axle carrier.

INSTALLATION





1. INSTALL SPEED SENSOR
a. Install the speed sensor to the axle carrier.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
b. Install the 2 sensor wire harness clamp bolts to the body and shock absorber.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)





2. CONNECT SPEED SENSOR CONNECTOR
a. Connect the speed sensor connector, and put in the sensor wire harness with the grommet.
b. Install the quarter trim, seatback and seat cushion.
3. CHECK SPEED SENSOR SIGNAL