Blower Motor Linear Controller (Auto A/C)

INSPECTION

1. REMOVE LOWER NO.1 PANEL




2. REMOVE HEATER PROTECTOR
Release the 3 claws and pull out the heater protector.




3. REMOVE BLOWER MOTOR LINEAR CONTROLLER
a. Disconnect the connector.
b. Remove the 2 screws and controller.

4. INSPECT BLOWER MOTOR LINEAR CONTROLLER
Refer to Heating and Air Conditioning; Testing and Inspection.
5. INSTALL BLOWER MOTOR LINEAR CONTROLLER
a. Install the controller with the 2 screws.
b. Connect the connector.

6. INSTALL HEATER PROTECTOR
7. INSTALL LOWER NO.2 PANEL