Removal And Installation
REMOVAL1. DRAIN ENGINE COOLANT FROM RADIATOR
HINT: It is not to drain out all coolant.
2. DISCONNECT RADIATOR UPPER HOSE
3. 2AZ-FE:
REMOVE CONDENSER FAN
a. Disconnect the radiator reservoir hose.
b. Disconnect the 2 connectors.
c. Remove the 3 bolts and condenser fan.
4. 1MZ-FE:
REMOVE CONDENSER FAN
a. Disconnect the connector.
b. Remove the 2 bolts and fan.
INSTALLATION
1. 2AZ-FE:
INSTALL CONDENSER FAN
a. Install the condenser fan with the 3 bolts.
Torque: 5.0 N.m (50 kgf.cm, 44 in.lbf)
b. Connect the 2 connectors and reservoir tank hose.
2. 1MZ-FE:
INSTALL CONDENSER FAN
a. Install the condenser fan with the 3 bolts.
Torque: 5.0 N.m (50 kgf.cm, 44 in.lbf)
b. Connect the connector.
3. CONNECT RADIATOR UPPER HOSE
4. FILL WITH ENGINE COOLANT