With Manufacturer's Scan Tool

DIAGNOSIS SYSTEM

a. Check the indicator.




When the ignition switch is turned ON, check that the ABS warning light, TRAC OFF indicator light and SLIP indicator light comes on for 3 seconds.

HINT: If the indicator check result is not normal, proceed to the troubleshooting for the ABS warning light circuit, TRAC OFF indicator light circuit and SLIP indicator light circuit.

b. In case of using hand-held tester:
Check the DTC.




1. Connect the hand-held tester to the DLC2.
2. Turn the ignition switch ON.
3. Read the DTC by following the prompts on the tester screen.
Please refer to the hand-held tester operator's manual for further details.