Variable Valve Timing Solenoid: Service and Repair

Camshaft Timing Oil Control Valve:

REMOVAL
1. REMOVE V-BANK COVER







a. Using a 5 mm hexagon wrench, remove the 3 cap nuts.
b. Loosen the V-bank cover fastener counterclockwise.

HINT: At the time of installation, please refer to the following items.

Press down the V-bank cover fastener.

c. Remove the V-bank cover.

2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVES







a. Disconnect the 2 camshaft oil control valve connectors.
b. Remove the bolt, camshaft oil control valve and O-ring.
Remove the 2 camshaft oil control valves.

Torque: 7.5 N.m (80 kgf.cm, 66 in.lbf)

c. Remove the O-ring from the each camshaft oil control valve.

HINT: At the time of installation, please refer to the following items.

Use a new O-ring.


INSTALLATION
Installation is in the reverse order of removal.