Accelerator Pedal Position Sensor: Service and Repair

Acceleration Pedal Position Sensor:

REPLACEMENT

NOTE: To prevent deterioration, do not shock the accelerator pedal position sensor.




1. REMOVE ACCELERATOR PEDAL ASSEMBLY
a. Disconnect the accelerator pedal position sensor connector.




b. Remove the 2 bolts and accelerator pedal assembly (w/accelerator pedal position sensor) from the body.

2. INSTALL ACCELERATOR PEDAL ASSEMBLY
a. Install the accelerator pedal assembly with the 2 bolts to the body.

Torque: 16 N.m (163 kgf.cm, 12 ft.lbf)

b. Connect the accelerator pedal position sensor connector.

3. INSPECT SYSTEM OPERATION