SAE Controlled Codes

DIAGNOSTIC TROUBLE CODE CHART

P0100 - P0130:

P0133 - P0335:

P0340 - P0505:

HINT:
- Parameters listed in the chart may not be exactly the same as your reading due to the type of instrument or other factors.
If a malfunction code is displayed during the DTC check in check mode, check the circuit for that code listed in the table below. For details of each code, refer to the applicable Trouble Code Diagnostic Procedures.
- When the ignition switch is ON and "READY" indicator light is OFF, the bulb check of the "MIL" is performed ("MIL" is ON).
When "MIL" is ON, but the DTC of the engine is not memorized, it may be because of HV control system abnormality, so check HV control system beforehand.