With 4-Speed A/T

INSPECTION








1. INSPECT SHIFT LOCK UNIT ASSEMBLY
Using a voltmeter, measure the voltage at each terminal.

HINT: Do not disconnect the shift lock control unit assembly connector.

2. INSPECT KEY INTERLOCK SOLENOID
a. Disconnect the solenoid connector.





b. Using an ohmmeter, measure the resistance between the terminals.
Standard resistance: 12.5 - 16.5 Ohms
If the resistance value is not as specified, replace the solenoid.





c. Provide the battery positive voltage between the terminals.
d. Check that the solenoid can be heard its operating.
If the operation is not as specified, replace the solenoid.