Second Brake

SECOND BRAKE





Components

Second Brake Piston Disassembly
- REMOVE SECOND BRAKE PISTON





a) Apply compressed air to the oil hole to remove the piston.





b) Remove the 2 0-rings from the piston.

Second Brake Inspection
- INSPECT DISCS, PLATES AND FLANGE
Check if the sliding surface of the discs, plates and flanges are worn or burnt. If necessary, replace them.





HINT:
^ If the lining of the disc is peeling off or discolored, or even a part of the printed numbers are defaced, replace all discs.
^ Before assembling new discs, soak them in ATF for at least 15 minutes.

Second Brake Piston Assembly
- INSTALL PISTON





a) Coat a new 0- ring with ATF.
b) Install the 2 0-rings on the piston.





c) Press the piston into the drum, being careful not to damage the 0-rings.