Front Seat

REMOVAL

REMOVE FRONT SEAT

a. Using a screwdriver, remove the seat track covers.

HINT: Tape the screwdriver tip before use.

b. Remove the 4 bolts.
c. w/ Side airbag assembly:
Disconnect the connector.

d. Remove the front seat.

NOTE: Be careful not to damage the body.

INSTALLATION

INSTALL FRONT SEAT

a. Slide the front seat to the most front position.

NOTE: Make sure that seat adjuster locks.

b. Without holding the seat track handle, mount the seat to the vehicle.

HINT: If holding the seat track handle, the adjusted most front positions slip off.

c. Tighten the bolts on the rear side temporarily, from the bolt on the inner side tighten them completely.

Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)

d. Slide the seat to the most rear position to install the bolts on the front side.

Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)

e. w/ Side airbag assembly:
Connect the connector.

f. Install the seat track covers.