Crankshaft Position Sensor: Service and Repair

Crankshaft Position Sensor Part 1:

Crankshaft Position Sensor Part 2:

REMOVAL

1. REMOVE INTAKE MANIFOLD
2. REMOVE ENGINE UNDER COVER RH

3. REMOVE CRANKSHAFT POSITION SENSOR




a. Disconnect the crankshaft position sensor connector.




b. Remove the 2 bolt and crankshaft position sensor.

Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)

INSTALLATION
Installation is in the reverse order of removal.