Camshaft Position Sensor: Service and Repair

Camshaft Position Sensor:

REMOVAL

1. REMOVE NO.2 CYLINDER HEAD COVER




2. 1ZZ-FE:
REMOVE CAMSHAFT POSITION SENSOR
a. Disconnect the connector.
b. Remove the bolt and camshaft position sensor.

Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)




3. 2ZZ-GE:
REMOVE CAMSHAFT POSITION SENSOR
a. Disconnect the connector.
b. Remove the 2 bolts and camshaft position sensor.

Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)

INSTALLATION
Installation is in the reverse order of removal.