On-Vehicle Inspection

CAMSHAFT TIMING OIL CONTROL VALVE




INSPECT OIL CONTROL VALVE RESISTANCE

a. Remove the No.2 cylinder head cover.

b. 2ZZ-GE:
Disconnect the 2 PCV hoses.

c. Disconnect the oil control valve connector.
d. Using an ohmmeter, measure the resistance between the terminals.

Resistance: 6.9 - 7.9 ohms at 20 °C (68 °F)

If the resistance is not as specified, replace the valve.

e. Reconnect the oil control valve connector.
f. Reinstall the V-bank cover.