Power Window Switch: Testing and Inspection

NOTE: This article contains corrected data processed from TSB# PG001-05.

INSPECTION







1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
a. Check the continuity between each terminal of the connector.

NOTICE: Whether the operation is good or bad can be judged by the basic function check, because the continuity cannot be checked by UP/DOWN operation of the driver side switch.

If the continuity is not as specified, replace the switch.







2. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY
a. Check the continuity between each terminal of the connector when operating the switch.
If the continuity is not as specified, replace the switch.