Sunroof / Moonroof Switch: Testing and Inspection

INSPECT SLIDING ROOF RELAY AND SWITCH (TMMK MADE)




a. Inspect the sliding roof relay and switch operation.




1. Disconnect the connector from the sliding roof relay and inspect the connector on the vehicle's side.

HINT: If the value is not as specified, there may be a malfunction in the vehicle's side.




2. Connect the connector, and inspect the voltage and continuity between each terminal of the connector and the body ground.

HINT: If the value is not as specified, the sliding roof drive gear may be defective.

INSPECT SLIDING ROOF RELAY AND SWITCH (TMC MADE)




a. Inspect the sliding roof relay and switch operation.




1. Disconnect the connector from the switch and inspect the connector on the vehicle's side.
If the value is not as specified, there way be a malfunction in the vehicle's side.




2. Connect the connector, and inspect the voltage and continuity between each terminal of connector and body ground.
If the value is not as specified, sliding roof drive gear or communication line way be defective.