Removal and Installation

REMOVAL




1. REMOVE DRIVE BELT
Turn the drive belt tensioner slowly clockwise and loosen it.

HINT: At the time of installation, please refer to the following items.

Install the drive belt.




2. REMOVE GENERATOR
a. Remove the terminal cover and nut, disconnect the generator wire.
b. Disconnect the generator connector.
c. Disconnect the engine wire.
d. Remove the 2 bolts and generator.

HINT: At the time of installation, please refer to the following items.

Install the 2 bolts and generator.

Torque:
12 mm head: 21 N.m (214 kgf.cm, 15.4 ft.lbf)
14 mm head: 52 N.m (530 kgf.cm, 38 ft.lbf)

INSTALLATION
Installation is in the reverse order of removal.