Crankshaft Position Sensor: Testing and Inspection

ON-VEHICLE INSPECTION

NOTE: "Cold" and "Hot" in these sentences express the temperature of the coils themselves. "Cold" is from -10 °C (14 °F) to 50 °C (122 °F) and "Hot" is from 50 °C (122 °F) to 100 °C (212 °F).

INSPECT CRANKSHAFT POSITION SENSOR




a. Disconnect the crankshaft position sensor connector.







b. Using an ohmmeter, measure the resistance between the terminals.
If the resistance is not as specified, replace the crankshaft position sensor.

c. Connect the crankshaft position sensor connector.