Service Hints
E7 (A), E8 (B), E9 (C), E10 (D), E11 (E) ENGINE CONTROL MODULEVoltage at engine control module wiring connector
BATT - E1 : Always 9.0 - 14.0 volts
+B - E1 : 9.0 - 14.0 volts (Ignition SW at ON position)
VC - E2 : 4.5 - 5.5 volts (Ignition SW at ON position)
VTA - E2 : 0.3 - 1.0 volts (Ignition SW on and throttle valve fully closed)
3.2 - 4.9 volts (Ignition SW on and throttle valve open)
VG - E2G : 1.1 - 1.5 volts (Engine idling and A/C SW off)
THA - E2 : 0.5 - 3.4 volts (Engine idling and intake air temperature 20 °C, 68 °F)
THW - E2 : 0.2 - 1.0 volts (Engine idling and coolant temperature 80 °C, 176 °F)
IGF - E1 : 4.5 - 5.5 volts (Ignition SW at ON position)
Pulse generation (Engine idling)
SIL - E1 : Pulse generation (During transmission)
TACH - E1 : Pulse generation (Engine idling)
STA - E1 : 6.0 volts or more (Engine cranking)
FC - E01 : 9.0 - 14.0 volts (Ignition SW at ON position)
0 - 3.0 volts (Engine idling)
SPD - E1 : Pulse generation (Ignition SW on and rotate driving wheel slowly)
W - E01 : Below 3.0 volts (Ignition SW at ON position)
NSW - E1 : 9.0 - 14.0 volts (Ignition SW on and other shift position in P or N position)
0 - 3.0 volts (Ignition SW on and shift position in P or N position)
EVP1 - E01 : 9.0 - 14.0 volts (Ignition SW at ON position)
STP - E1 : 7.5 - 14.0 volts (Ignition SW on and brake pedal depressed)
Below 1.5 volts (Ignition SW on and brake pedal released)
KNK1 - E1 : Pulse generation (Engine idling)
PS - E1 : 9.0 - 14.0 volts (Ignition SW at ON position)
HAFL - E04 : Below 4.0 volts (Engine idling)
9.0 - 14.0 volts (Ignition SW at ON position)
IGSW - E1 : 9.0 - 14.0 volts (Ignition SW at ON position)
MREL - E1 : 9.0 - 14.0 volts (Ignition SW at ON position)
G22+, NE+, -NE- : Pulse generation (Engine idling)
OCV+ -OCV- : Pulse generation (Ignition SW at ON position)
HT1B - E1 : 9.0 - 14.0 volts (Engine idling)
Below 3.0 volts (Ignition SW at ON position)
AF1A+ - E1 : 3.3 volts (Ignition SW at ON position)
AF1A- - E1 : 3.0 volts (Ignition SW at ON position)
OX1B - E1 : Pulse generation (Maintain engine speed at 2500 rpm for 90 sec. after warming up)
IGT1, IGT2, IGT3, IGT4 - E1 : Pulse generation (Engine idling)
#10, #20, #30, #40 - E01 : 9.0 - 14.0 volts (Ignition SW at ON position) Pulse generation (Engine idling)