Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Problem Symptom Confirmation (Road Test)

PROBLEM SYMPTOM CONFIRMATION (Road Test)




a. Inspect the SET switch.
1. Push the main switch ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. Push the control switch downward for SET/COAST.
4. After releasing the switch, check that the vehicle cruises at the desired speed.




b. Inspect the ACC (acceleration) switch.
1. Push the main switch ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. Check that the vehicle speed increases while the control switch is turned to RES/ACC, and that the vehicle cruises at the set speed when the switch is released.
4. Momentarily push the control switch upward for RES/ACC and then immediately release it. Check that the vehicle speed increases by about 1.5 km/h (Tap-up function).




c. Inspect the COAST switch.
1. Push the main switch ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. Check that the vehicle speed decreases while the control switch is turned to SET/COAST, and the vehicle cruises at the set speed when the switch is released.
4. Momentarily push the control switch downward for SET/COAST, and then immediately release it.
Check that the vehicle speed decreases by about 1.5 km/h (Tap-down function).




d. Inspect the CANCEL switch.
1. Push the main switch ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. When operating one of the followings, check that the cruise control system is cancelled and that the normal driving mode is reset.
- Depress the brake pedal.
- Shift into except D position.
- Push the main switch OFF.
- Pull the cruise control switch for CANCEL.




e. Inspect the RES (resume) switch.
1. Push the main switch ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. When operating one of the followings, check that the cruise control system is cancelled and that the normal driving mode is reset.
- Depress the brake pedal.
- Shift into except D position.
- Pull the cruise control switch for CANCEL.

4. After the control switch is turned to RES/ACC at the driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed before the cancellation.